Top rigid router table insert for 2019

If you looking for rigid router table insert then you are right place. We are searching for the best rigid router table insert on the market and analyze these products to provide you the best choice.

If you looking for rigid router table insert then you are right place. We are searching for the best rigid router table insert on the market and analyze these products to provide you the best choice.

Best rigid router table insert

Product Features Editor's score Go to site
KREG Molded Router Table Insert Plate Blank, for All Routers KREG Molded Router Table Insert Plate Blank, for All Routers
Go to amazon.com
Skil RAS900 Router Table Skil RAS900 Router Table
Go to amazon.com
MLCS 9338 All-In-one Router Plate Kit MLCS 9338 All-In-one Router Plate Kit
Go to amazon.com
Delta Table Saw Zero Clearance Insert By Peachtree Woodworking PW955 Delta Table Saw Zero Clearance Insert By Peachtree Woodworking PW955
Go to amazon.com
Taytools 300016 Deluxe 24 Taytools 300016 Deluxe 24" Long Router Table Fence 3-1/2" Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port
Go to amazon.com
JessEm Rout-R-Plate Phenolic Router Table Insert Plate, JessEm# 03101 JessEm Rout-R-Plate Phenolic Router Table Insert Plate, JessEm# 03101
Go to amazon.com
JessEm Rout-R-Lift II 02314, 9-1/4-Inch by 11-3/4-Inch for Rigid brand routers JessEm Rout-R-Lift II 02314, 9-1/4-Inch by 11-3/4-Inch for Rigid brand routers
Go to amazon.com
Drill Press Table 15 Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 each 3/8" Hold Downs and 2 Zero Clearance Table Inserts. Secures to Most Any Style or Size Drill Press
Go to amazon.com
JessEm 02120 Mast-R-Lift II Router Lift + 02030 10-piece Insert Ring Kit w/Caddy JessEm 02120 Mast-R-Lift II Router Lift + 02030 10-piece Insert Ring Kit w/Caddy
Go to amazon.com
Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension
Go to amazon.com
Related posts:

1. KREG Molded Router Table Insert Plate Blank, for All Routers

Feature

38"-thick compression-molded phenolic plate provides a flat plate surface that won't sag
9-14" x 11-34" size accommodates large routers easily
Alignment marks on undrilled version provide easy router mounting
Level-Loc reducing rings provide three bit opening sizes of 1", 1-316" and 2-58"
Includes removable brass starting pin, Level-Loc wrench and detailed instructions

Description

This Kreg Table Insert Plate Blank for Routers is made from compression molded phenolic material so it won't sag even under the weight of a heavy router. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. A blank version comes without predrilled router-mounting holes, and features alignment marks on the underside that make it easy to center and mount any router.

2. Skil RAS900 Router Table

Feature

Accessory storage containers protect and store accessories with router table
RAS900 comes with 2 containers and includes quick clamp system
Two featherboards help guide workpiece for more accurate routing
Bit height gauge helps simplify set-up and improves accuracy of cuts
Starter pin and guard help support workpiece when routing curved edges
Router mounting with easy bit changes and no leveling required

Description

The RAS900 come pre-assembled with an integrated accessory storage bag and a laminated MDF top. The self-contained structure provides storage for necessary parts like the fence and router bits. Included with the RAS900 is a guard, featherboard, miter gauge and bit inserts; along with a tall fence with adjustable laminated MDF faces; dual featherboards, a starter pin and guard for support when routing curved workpieces; a bit height gauge for easier bit setup and cutting precision, and additional accessory storage compartments. The RAS900 has a quick-release router mount that attaches and detaches in seconds. An efficient folding design means the table comes pre-assembled with minimal setup needed and legs fold for storage. Stability plus convenience makes this a great router table for any DIYer.

3. MLCS 9338 All-In-one Router Plate Kit

Feature

Everything You Need to Mount Your Router to a Table!
Strong, durable phenolic plastic will hold any router
3 bit opening sizes
Easy installation
Magnetic plate hold-down

Description

3/8" thick phenolic router plate supports any router. 2 removable rings give three different bit openings: (3-7/8", 2-5/8", 1-3/16"). Note: 1-3/16" opening is designed to hold Porter Cable (R) style guide bushings. The steel starting guide pin allows routing curved work. The plate is approximately 9" x 12" with pre-drilled table mounting holes. Includes magnets and adjusting screws for securing and leveling the plate. Also includes concentric rings on bottom of plate for easy alignment when installing your router.

4. Delta Table Saw Zero Clearance Insert By Peachtree Woodworking PW955

Feature

The insert is blank so you can custom fit the blade slot for standard Kerf, Thin Kerf or Dado blades
Helps to prevent tear-out and closes the large factory gap between blade and insert.
Insert comes with leveling screws and rear safety pin
13 3/8" x 3 3/4" x 1/2" thick- Made of UHMW
Please check your Length,Width and Thickness of your current insert before ordering

Description

Replace your factory table saw insert with a UHMW zero clearance insert. Zero Clearance inserts help prevent kickback and tear-out on your stock pieces when feeding through a table saw blade. By raising your blade up through the insert, you eliminate gaps between the side of the insert and the blade. This provides with much better stock support than with most factory inserts that come with the saw. This also prevents smaller stock pieces from falling into the opening that exists with factory inserts. Zero clearance inserts can be used with any type of standard carbide tipped saw blade (standard or thin kerf blades) and can also be used with dado blades. It is recommended that if you need an insert to accommodate both a standard saw blade and a dado blade, that you purchase two separate zero clearance inserts. Use one for your normal cuts and one for dado cuts.

5. Taytools 300016 Deluxe 24" Long Router Table Fence 3-1/2" Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port

Feature

Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes.
The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop.
Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.

Description

This deluxe router table fence will introduce a new level of accuracy and cleanliness to any shop. This deluxe router table fence is made from 3/8 inch thick precision extruded anodized aluminum that will stay straight and true when humidity changes. It measures a full 3-1/2 inches tall and 3-1/2 inches wide. Rear-mounted 4-1/2 inch tall adjustment knobs make it easy to adjust the fence back and forth. The fence faces are made from smooth melamine coated MDF. The fence opening can be adjusted by way of 4 rear mounted threaded knobs. The fence opening can accommodate bits up to 3-1/2 inches in diameter. The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face. T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop. Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening. Table and router not included.

6. JessEm Rout-R-Plate Phenolic Router Table Insert Plate, JessEm# 03101

Feature

3/8" thick phenolic with durable friction-free coating
Convenient center-hole bushing used to align the router so it is centered in the bit hole
Plate center-hole is machined to accept a 3-1/2" raised panel bit
Two additional Tab-Loc insert rings to reduce the size of the bit opening
Simple step-by-step instructions make accurately drilling and mounting any router easy

Description

JessEm Rout-R-Plate is a perfectly flat, rigid and durable mounting solution for reliable use in any router table application.

7. JessEm Rout-R-Lift II 02314, 9-1/4-Inch by 11-3/4-Inch for Rigid brand routers

Feature

The JessEm 02314 Rout-R-Lift II router lift is compatible with Rigid brand router motor 29302.
Features a 9-1/4" x 11-3/4" Phenolic insert plate.
Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts.
Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench.
Additional insert rings available separately.

Description

The Rout-R-Lift II from JessEm brings affordable precision to the entry-level router lift market. But do not be fooled! JessEm's high standards of manufacturing are present throughout this lift, just as in their higher-end equipment. The lift spindle is equipped with double-sealed bearings for very smooth operation. There is a built-in locking mecahnism to ensure the lift stays where you put it, giving you confidence while you work on your project! The top measures 9-1/4 in. x 11-3/4 in. and is constructed of heavy-duty 3/8-in Phenolic. As with all of JessEm's router lifts, the Rout-R-Lift II is designed for above-table access for convenient adjustment and bit changes -- no bent wrenches required! The insert opening can accommodate a 3-1/2 in. bit without an insert ring, and is designed to receive JessEm's insert rings with Tab-Lock for easy installation and removal, to reduce the size of the bit opening. Comes with mounting and leveling hardware, a starting pin, a hand crank, 3 insert rings (2 in., 2-1/2 in., and 1-3/8 in.), and 1 insert wrench. Additional insert rings are avaiable separately. The JessEm 02314 Rout-R-Lift is compatible with Rigid Brand router motor 29302..

8. Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 each 3/8" Hold Downs and 2 Zero Clearance Table Inserts. Secures to Most Any Style or Size Drill Press

Feature

Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits.
Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter. That feature alone separates the Fulton Drill Press Table from the others
Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter.
That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.

Description

Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today. The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter. That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top. Once attached the table can be moved or removed if necessary. The Fulton Drill Press Table is truly one of those items that every drill press owner should have!

9. JessEm 02120 Mast-R-Lift II Router Lift + 02030 10-piece Insert Ring Kit w/Caddy

Feature

Mast-R-Lift II has 9-1/4" x 11-3/4" top plate, and includes 1 insert wrench, 1 starter pin, 2 hex keys, 10 leveling screws, and 1 crank handle
Fits Porter Cable 690/890/7518, Bosch 1617/1618, DeWalt 610/616/618, Craftsman 17543/17540/28190, Makita 1101, Hitachi M12VC,/KM12VC, Milwaukee 5626/5615/5616/5619, Rigid R29302
Large 3-5/8" opening to accept large cutters; full 3-1/2" of adjustment
Ten-ring set includes: Blank, 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2", 1-3/4" and 2-1/4"
Three (3) additional insert rings (2", 2-1/2", and 1-3/8") are included with the Mast-R-Lift II, for a total of 13 rings, which all fit in the included caddy

Description

The Mast-R-Lift II has 5 double sealed bearings. The lift adds tension to the threaded spindle to remove backlash and vibration, and prevent setting changes while routing. Includes a dedicated locking mechanism for heavy duty, long term routing operations, accessible from the top of the top surface and is engaged with the same crank handle used to raise and lower the Lift. The Mast-R-Lift II also fits most fixed base routers on the market today without the use of an adaptor collar. The unique clamping blocks enable users to use different fixed base routers with the Lift as opposed to dedicating a router. All of our top plates on our Lifts are hard anodized. This is an engineered surface treatment and not just a cosmetic sulphuric treatment that will wear off. The shafts on the Mast-R-Lift II are pressed into a shaft mount with hydraulic pressure, not just threaded to the top plate. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than just one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. The Mast-R-Lift II provides for above the table bit changes for all routers without the need for bent wrenches. All the machined components are machined on one of our CNC machining centers in Barrie, Ontario Canada, and all the aluminum non wear components are anodized for appearance, corrosion resistance and some wear resistance. Mast-R-Lift II includes 1 insert wrench, 1 starter pin, 2 hex keys, 10 leveling screws, and 1 crank handle, plus three (3) insert rings: 2", 2-1/2", and 1-3/8". JessEm's all new 10 Piece insert ring set includes: Blank, 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2", 1-3/4" and 2-1/4". All rings feature JessEm's standard Tab-Lock design. The convenient storage caddy will hold 14 rings. A total of thirteen (13) rings are included in this complete package.

10. Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension

Feature

Fits all contractor-grade table saws and all right-tilt cabinet-grade table saws that have 27-Inch deep by 1-1/2-Inch thick cast iron tables.
Included ProFence quickly dismounts and hangs on provided j-hooks while you use your tablesaw.
Perfect for small shops.
Includes router top, fence, and mounting hardware. ProPlate is sold separately. Plate opening 8-1/4 by 11-3/4. The ProLift 40-150 has a 3/8" thick plate.
Limited Lifetime Warranty.

Description

Expand your table saw's versatility by adding this industrial grade router table in place of the extension wing. Perfect for shops where space is tight, ProMAX includes a cast-iron top, Bench Dog's 28" ProFence, a miter gauge track that adjusts for a no-slop fit. If workspace is an issue, the ProMAX has you covered. Its dual fence slot configuration lets you rotate the fence and work from either side of the table to maximize surface area. Plus, with a third miter slot at its disposal, your table saw becomes perfectly equipped to handle crosscut sleds. Accepts 8-1/4" x 11-3/4" router table plates. Note: ProMAX cannot be installed as a left extension replacement on left tilt "cabinet" grade table saws because the table saw's motor protrudes to the left. Nor can ProMAX be installed as a right extension replacement on right tilt "cabinet" grade table saws for the same reason. Mounting ProMAX to the far right will avoid the protruding motors, however, ProMAX must be supported with two steel rails that also support your T-square style rip fence and legs.

Conclusion

All above are our suggestions for rigid router table insert. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using rigid router table insert with us by comment in this post. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *