Finding your suitable table saw guard replacement is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best table saw guard replacement including detail information and customer reviews. Let’s find out which is your favorite one.
Best table saw guard replacement
1. SawStop TSA-ODC Over-Arm Dust Collection Assembly
FeatureCompatible with the 36-inch and 52-inch SawStop Contractor Saws.
Fits all SawStop T-Glide rail systems
Requires Sawstop Dust Collection Blade Guard.
Custom Y-Port unites above and below-table dust collection into one 4 port. (Requires Contractor Saw Dust Collection Panel).
Easy and quick installation.
DescriptionThe Overarm Dust Collection Assembly removes dust up and out of the way. This unit is compatible with all SawStop Cast Iron saws (Jobsite Saw not included). Fits all SawStop T-Glide rail systems (not 30" CNS rail kit). Connects directly to SawStops Dust Collection Blade Guard (TSG-DC required). Custom Y-Port unites above and below-table dust collection into one 4 port.
2. Craftsman 089037007700 Blade Guard Assembly for 315284610 Table Saw
FeatureAuthentic Craftsman replacement part
Fits Craftsman 315284610 10-Inch Table Saw
Fits the Ryobi RTS10 10-Inch Table Saw
Standard duty replacement part
Built strong for longer life
DescriptionThe Craftsman 089037007700 Blade Guard Assembly is an authentic Craftsman replacement part. It's compatible with the Craftsman 315284610 Table Saw. It also fits the Ryobi RTS10 10-Inch Table Saw and weighs 0.94-pounds. Craftsman is a leader in wrench sets, garage door openers, screw drivers, air compressors and much more. With over one billion hand tools sold and countless industry awards, Craftsman is America's number one tool brand.
3. WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light
FeatureUnique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
Variable speed goes from 400 to 1600 strokes per minute
Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
Features a cast iron base, air pump, flex light, dust port, foot lock clamp, onboard storage, and three blades
DescriptionRemember when your scroll saw could cut in two different directions? Take on the most intricate and artful cuts with the WEN 16-Inch Variable Speed Two-Direction Scroll Saw. The 9/16-inch stroke saws through hard woods up to two inches thick. Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. The cast iron base prevents vibration and walking during operation while the spacious 16-by-11-inch table bevels up to 45 degrees for angled cut. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Now, your cuts are no longer confined by the 16-inch throat of the scroll saw. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation. Onboard blade and holder storage creates simple organization solutions between jobs. And because its a WEN product, your scroll saw comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line, all to make sure you remember WEN.
4. DEWALT DWE7480XA 10-Inch Compact Job Site Table Saw with Guarding System and Stand
FeatureItem may ship in more than one box and may arrive separately
Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
24" of rip capacity, easily cuts a variety of larger shelving and trim materials
Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application
15 Amp 4800 rpm motor quickly rips through hardwoods with ease
Includes a heavy-duty table saw stand that folds flat for easy storage
DescriptionDEWALT DWE7480XA 10" Compact Job Site Table Saw features rack and pinion telescoping fence rails which allows user to make fence adjustments fast, smooth and accurate. 24-1/2 inch of rip easily cuts a variety of larger shelving and trim materials. The Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application. The durable 15 Amp 4800 rpm motor quickly rips through hardwoods with ease. A 24-Tooth carbide blade enhances cut quality and prolongs blade life and the blade can be adjusted 0 - 45 degrees for bevel applications. This system uses 10" blades with a 5/8" arbor size. The adjustable rear feet are designed to level the saw on uneven work surfaces and table coating reduces friction for smoother cutting. There is a dust port that allows for 2-1/2 inch vacuum hook up and minimizes clean up. The metal roll cage base offers greater durability than plastic bases. This table saw features on-board storage that provides easy access to the Site-Pro Guarding components and push stick when not in use. This unit also includes a DW7450 Table Saw Stand which features heavy-duty tube steel construction to maximize its durability, and has integral support bar hardware holes that can be used to secure the saw to the stand. This stand folds flat for easy storage and transport. The DWE7480XA ships in two boxes which consist of the DWE7480 Table Saw, and the DWE7450 Table Saw Stand. This combo also includes: (1) Miter gauge, (1) Push stick, (1) 10 Carbide Blade, (1) Blade guard, and (1) Hardware bag.
5. Delta S26-261L Shopmaster 10" Slide Miter Saw with Laser
FeatureLightweight unit is easy to move from room to room or even from job to job
Table extensions help support long work pieces
Spindle lock holds spindle securely while bade nut is loosened and removed
Bevels left - from 0- 45, cuts Nominal 2X12 at full bevel
Laser - with on/off switch. Makes aligning blade to work piece more convenient and precise cuts
DescriptionThe Shopmaster brand is known for affordability and reliability. This Shopmaster 10 in. Slide Miter Saw is made by Delta Power Equipment and comes with a 3 Year Warranty. There is 1 sliding miter saw per package. The unit includes a dust collection bag and a work clamp. A built-in laser lets you know where the cut will be made.
6. SawStop TSG-DC Dust Collection Blade Guard
FeatureCollect 99% of above-table dust
Independent lateral slides minimize blade exposure
Low profile to allow for cuts as narrow as 3/4 of an inch
Attaches directly to customer's dust collection system
Compatible with SawStop Overarm Dust Collection
DescriptionUpgrade your SawStop Cast-Iron Saw with above-table dust collection on your 1.75HP Cast-Iron SawStop Table Saw (not compatible with Jobsite Saw). This item comes standard on 3HP and larger SawStop Cast-Iron table saws. Collect the majority of above-table dust with this handy, easy to assemble and mount accessory. The independent lateral slides minimize blade exposure, while the low profile allows for cuts as narrow as 3/4". The dust port attaches directly to customer's dust-collection system and is compatible with SawStop Overarm Dust Collection Assembly.
7. SawStop TSG-MG Micro Blade Guard
FeatureThis unit is compatible with all SawStop Cast-Iron saws (Jobsite Saw not included); For use with 10" blade
Tool free attachment and removal; Six swinging side panels move with wood to assist blade coverage
Easy swing-up for quick access
Standalone splitter can be removed from guard and used independently.
DescriptionReliable Blade Guarding for multiple applications. Allows for tool-free attachment and removal, with six swinging side panels that move with wood to assist blade coverage. This unit is compatible with all SawStop Cast-Iron saws (Jobsite Saw not included).
8. SawStop TSI-SLD Standard Lock Down Insert
FeaturePositive locking latch allows for tool-free operation
Positioning screws ensure a solid and precise fit in the table
Pre-formed clearance slots for SawStop blade guard and riving knife
Solid phenolic core
Low-friction, wear-resistant melamine surface
DescriptionThis insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using standard 10" saw blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving knife and has dual metal wear plates for antikickback pawls. The positive locking latch allows for tool-free operation.
9. Dremel US40-03 Ultra-Saw Tool Kit with 5 Accessories and 1 Attachment
Feature7.5 Amp - for faster cutting and tougher applications. Voltage:120V
Faster speed of cut - rip through plywood and cut more metal
3-in-1 tool - go beyond cutting and flush cutting with surface preparation applications including rust, paint, and thinnest removal
Added durability - improved drive-train lasts 3x longer than the Saw-Max and its metal foot and guard handle tough applications
Excellent line of sight for precise, confident cuts
DescriptionThe Dremel Ultra-Saw was designed for users who want a tool that can do everything the Dremel Saw-Max can do, and more. With a 7.5-amp motor and a durable drive train, the Ultra-Saw has more power for making long cuts. A metal foot and guard resists the heat generated by heavy-duty jobs like grinding and cutting metal. Large, 3.5- and 4-inch cutting wheels give our small circular saw fast cutting speeds and improved performance in a wide variety of materials. Plus, with our exclusive accessories, the Dremel Ultra-Saw offers the added ability to perform surface preparation tasks like removing paint, rust and thin-set mortar.
10. FEIN 92027060090 Turbo I Vacuum, 5.8 Gallon
FeatureAuto-Start Vacuum for power tools-allows your vacuum to turn on automatically!
Powerful suction with 98.4" of static water lift
On board storage for cord and accessories
Long hose (13') and cord (18') for ease of use
By-pass cooling for long life of vacuum; Tool coupling with suction control for easy control of suction power.